Shop the Sonar Shield Lowrance ActiveTarget 2 Transducer Cover
Your live sonar is part of the setup you have chosen carefully. A dedicated travel cover gives that equipment a practical layer of protection when you are moving between fishing destinations. The goal is straightforward: protection designed around the transducer you own.
Why a dedicated cover matters
A transducer has its own shape, cable exit and mounting arrangement. Choosing protection by the complete product model makes more sense than choosing by a photograph alone. Sonar Shield lists a separate cover for Lowrance ActiveTarget 2; start with that listing and confirm your model before ordering.
A cover is an accessory for transport and handling. It is not a substitute for the mounting hardware, proper cable routing or the motor manufacturer's securement procedures. It also does not change the sonar's operating capabilities or guarantee protection against every impact.
Protect the component without complicating the setup
Look at the space around the installed transducer. The correct cover should be able to fit without forcing a cable into a sharp bend or pressing against nearby hardware. Follow the supplied instructions, and contact Sonar Shield if the mount or pole on your boat makes fit unclear.
With the motor safely secured and powered off as appropriate, check the surrounding space before trailering. Confirm that the cover is fitted as directed and that the equipment is secured according to its own instructions. Do not use the cover as a lifting point, a mounting bracket or a way to hold loose equipment in place.
ActiveTarget 2 is not ActiveTarget 2 XL
The full model name matters. Sonar Shield has a separate ActiveTarget 2 XL listing. Similar names and similar-looking cover photographs do not establish interchangeable fit. Match the listing to the transducer label and ask about any uncertain installation.
What to check before choosing
- Confirm the exact Lowrance transducer model.
- Review the current listing and selected option.
- Check mounting and cable clearance on your setup.
- Use the supplied cover instructions and the equipment manufacturer's transport guidance.
Remove the travel cover before operating the sonar. Once it is off, the transducer can do the job it was designed to do. This is normal use of a travel accessory, not an indication that your electronics need unusual handling.
A useful accessory for equipment you value
The best product choice solves a clear ownership need. If protecting an ActiveTarget 2 between destinations is on your checklist, review the current Sonar Shield cover listing and choose by the exact model. Questions about your mount or fit? Contact Sonar Shield before ordering so the recommendation reflects your actual setup.
Product information: Sonar Shield's linked product listings. Artwork uses Sonar Shield's supplied product imagery.
Created with AI assistance using Sonar Shield's topic direction and research from the sources cited in this article.